Full height turnstiles, often seen in high – security areas like prisons, power plants, and large industrial complexes, are a staple in the access control industry. As a supplier of full height turnstiles, I get asked a lot about their height. So, let’s dig into how tall these bad boys actually are. Full Height Turnstiles
Standard Heights of Full Height Turnstiles
Most full height turnstiles on the market have a standard height that ranges from 72 inches (6 feet) to 96 inches (8 feet). The 72 – inch turnstiles are quite common. They’re tall enough to prevent most people from easily climbing over, which is a key factor in access control. For many facilities, this height provides a good balance between security and cost – effectiveness.
The 96 – inch turnstiles, on the other hand, offer an even higher level of security. They’re often used in places where the threat of unauthorized entry is particularly high. For example, in a maximum – security prison, the extra height can be a crucial deterrent against inmates trying to escape.
Factors Influencing the Height
There are several factors that influence the choice of height for full height turnstiles.
Security Requirements
The primary consideration is always security. If a facility has a high – risk environment, such as a military base or a data center with sensitive information, a taller turnstile is usually the way to go. A 96 – inch turnstile makes it extremely difficult for an unauthorized person to climb over, even with the use of makeshift tools.
On the other hand, if the security threat is relatively low, like in a small industrial park, a 72 – inch turnstile might be sufficient. It still provides a reasonable level of access control without breaking the bank.
User Comfort and Accessibility
While security is important, user comfort and accessibility also play a role. In some facilities, such as airports or large event venues, there’s a need for a large number of people to pass through the turnstiles quickly. In these cases, a slightly shorter turnstile might be preferred, as it doesn’t feel as intimidating to the users.
However, it’s important to find the right balance. Even in these high – traffic areas, security can’t be compromised. So, the turnstiles still need to be tall enough to prevent unauthorized access.
Architectural and Space Constraints
The physical space where the turnstiles will be installed also matters. In some buildings, there might be height restrictions due to the architecture. For example, in an older building with low ceilings, a 96 – inch turnstile might not fit. In such cases, a 72 – inch turnstile would be a more practical choice.
Custom – Height Turnstiles
Not all facilities can make do with the standard heights. That’s where custom – height turnstiles come in. As a supplier, I’ve had clients who needed turnstiles that were taller or shorter than the standard options.
For example, I once worked with a client who had a unique security situation. They wanted a turnstile that was 108 inches (9 feet) tall. This was for a research facility where the risk of unauthorized access was extremely high. We were able to design and manufacture a custom – height turnstile to meet their specific needs.
On the other hand, I’ve also had clients who needed shorter turnstiles for areas where space was limited. In one case, a small office building wanted turnstiles that were only 60 inches (5 feet) tall. We were able to create a custom solution that met their requirements while still providing a reasonable level of security.
Measuring the Height
When it comes to measuring the height of a full height turnstile, it’s important to measure from the floor to the top of the turnstile structure. This includes any decorative elements or additional security features that are part of the turnstile.
It’s also important to note that the height measurement doesn’t include any base or mounting hardware that might be installed below the floor level. These are separate components that are used to secure the turnstile in place.
Benefits of Different Heights
72 – Inch Turnstiles
- Cost – Effective: They’re generally less expensive to manufacture and install compared to taller turnstiles. This makes them a popular choice for smaller businesses or facilities with a limited budget.
- User – Friendly: They’re less intimidating to users, which can lead to a smoother flow of traffic. This is especially important in areas where a large number of people need to pass through quickly.
- Suitable for Low – Risk Areas: For facilities where the security threat is relatively low, a 72 – inch turnstile can provide an adequate level of access control.
96 – Inch Turnstiles
- High – Level Security: They offer the highest level of security available. The extra height makes it extremely difficult for unauthorized individuals to climb over, even with the use of tools.
- Deterrence: The sheer height of a 96 – inch turnstile acts as a strong deterrent against potential intruders. It sends a clear message that the facility takes security seriously.
- Ideal for High – Risk Areas: In places like prisons, military bases, and high – security data centers, a 96 – inch turnstile is often the only option.
Making the Right Choice
As a supplier, my job is to help my clients make the right choice when it comes to the height of their full height turnstiles. I start by understanding their specific security requirements, the layout of their facility, and their budget.
If a client has a high – risk environment and a sufficient budget, I’ll usually recommend a 96 – inch turnstile. However, if they’re on a tight budget or have a low – risk area, a 72 – inch turnstile might be a better fit.
In some cases, a custom – height turnstile might be the best solution. This allows the client to get exactly what they need in terms of security and space requirements.
Conclusion
So, how tall are full height turnstiles? Well, it depends. The standard heights range from 72 inches to 96 inches, but custom – height turnstiles are also available. The choice of height depends on a variety of factors, including security requirements, user comfort, and architectural constraints.
Double Gate Turnstiles If you’re in the market for full height turnstiles and need help choosing the right height for your facility, don’t hesitate to reach out. I’m here to help you make the best decision for your security needs. Whether you need a standard – height turnstile or a custom – made one, I’ve got you covered.
References
- Industry reports on access control systems and turnstiles.
- Case studies of facilities using full height turnstiles.
- Interviews with security experts in the field.
Shenzhen CMOLO Intelligent Technology Co., Ltd.
As one of the most professional full height turnstiles manufacturers and suppliers in China, we’re featured by quality products and competitive price. Welcome to buy or wholesale full height turnstiles for sale here and get quotation from our factory. Contact us for customized service.
Address: CMOLO Industrial Park, NO.144-1, Hengping Road, Henggang Street, Longgang District, Shenzhen City, China
E-mail: contact@cmolo.com
WebSite: https://www.cmolo.com/
